2024 IIBEC OBEC BES Session- Examining Methods for Preserving and Improving the Energy Performance of Historic, Aluminum Framed Curtain Wall System (Wach, D.)

2024 BES Session: Examining Methods for Preserving and Improving the Energy Performance of a Historic, Aluminum Framed Curtainwall System

Course Overview
This session was originally presented at the 2024 IIBEC/OBEC Building Enclosure Symposium in Toronto, Canada.  This course includes the following components:

• recording of the live session
• a summative assessment consisting of 10 questions
• two surveys required to claim continuing education credit

Description
With respect to thermal performance, historic aluminum-framed curtainwall systems perform poorly compared to modern counterparts.. These systems are ideal candidates for replacement with newer thermally efficient systems during building retrofits. However, there are situations where replacement of the curtainwall system is not feasible due to other factors such as historic significance, constructability, or excessive costs. When a facade is designated as historically significant by local preservation authorities, the appearance of the curtainwall system must be maintained. This may be difficult with modern replacement systems, and customization may be cost prohibitive.  This session explores a method that was developed to thermally retrofit in-situ a historic curtainwall framing system while maintaining the original appearance of the system. The change in thermal performance is modeled to estimate improvements that can be achieved through retrofitting existing framing and compared to the improvement in replacing the existing framing. Finally, an energy cost-benefit analysis is conducted to account for embodied energy associated with the new framing system. The primary intended audience is designers and constructors focused on building restoration. Some background knowledge of building science fundamentals will assist the attendee's understanding.

Speaker(s)/Author(s)
David Wach, PEng
Senior Engineer
Engineering Link Inc.

Arthur Li, PEng
Project Engineer
Engineering Link Inc.

Course Access
Courses are accessible in LearnUpon for one year from the date of purchase.

Credit Start Date 8/12/24  Credit Expiration Date  8/12/27

Knowledge Level: Intermediate

IIBEC Core Competencies: Exterior Wall

Continuing Education Credit Statement
This course is approved for 1.0 IIBEC CEH
This course is approved for 1.0 AIA LU/HSW
AIA Course Number: BES24_14_OD
AIA Provider Number: G024

Continuing Education Credit Claim Information

To claim IIBEC CEHs, learners are required to:

• Complete the summative assessment
• Complete the course Evaluation & Attestation Survey

After completing the Evaluation & Attestation Survey, learners will be able to download a Certificate of Completion.  Learners are responsible for self-reporting IIBEC CEH credit by uploading their Certificate of Completion to their IIBEC Portal. For assistance in self-reporting CEHs, please reach out to: cehs@iibec.org

To claim AIA LU, learners are required to complete the above requirements, as well as:

• Complete the AIA Survey (AIA member number is required)

AIA continuing education Learning Units earned upon completion of this course will be reported to AIA CES for AIA members.

AIA CES Provider statement

IIBEC is a registered provider of AIA-approved continuing education under Provider G024. All registered AIA CES Providers must comply with the AIA Standards for Continuing Education Programs.  Any questions or concerns about this provider or this learning program may be sent to AIA CES (cessupport@aia.org or (800) AIA 3837, Option 3).

This learning program is registered with AIA CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. AIA continuing education credit has been reviewed and approved by AIA CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.