IIBEC Online Education

Course Overview This session was originally presented at the 2025 IIBEC International Convention & Trade Show in Orlando, Florida.  This course includes the following components: recording of the live session a summative assessment consisting of 10 multiple-choice questions two surveys required to claim continuing education credit   Description Exterior wall systems using insulated metal panels, adhered masonry, and exterior sheathing with integrated water-resistive barriers (WRBs) are often appealing due to their marketed “all-in-one” characteristics. They can present advantages, such as reduced labor and/or material costs and reduced overall installation time, while presumably providing the same or better code-compliance, aesthetics, and performance relative to their traditional multicomponent exterior wall enclosure counterparts (i.e., rainscreen metal panel systems, conventional veneer masonry systems, and other exterior wall coverings with sheathing and sheet- or liquid-applied WRBs). However, these systems can and do require increased attention and a more methodical approach during a systematic installation because they often lack the inherent redundancy and/or durability of traditional systems. This increased attention necessary during installation may also not be recognized. Even a slight deviation with installation of such systems can lead to premature failure and substantial remediation. This session will explore the potential adverse outcomes that can occur when seemingly minor departures from an idealized installation occur—departures that may not prove as significant for their traditional counterparts.   Speaker/Author Leah Ruther, PE Senior Associate Wiss, Janney, Elstner Associates Inc. Leah Ruther is a licensed professional engineer at Wiss, Janney, Elstner Associates Inc. Ruther graduated from Calvin University with a bachelor’s in civil engineering and from Lawrence Technological University with a master’s in civil engineering. Since joining WJE in 2012, Ruther has been involved with numerous structural engineering and architecture related projects. Her responsibilities include the investigation and analysis of existing and damaged structures, development of technical repair and rehabilitation documents, and construction observations.   Author/Speaker Brian Tognetti, RA, CCCA, NCARB Principal & Unit Manager Wiss, Janney, Elstner Associates Inc. Brian Tognetti of Wiss, Janney, Elstner Associates Inc. has nearly 30 years of architectural experience and is a registered architect in multiple states. He is a member of the Metro Detroit Chapter of BOMA, the Southeast Michigan Building Officials and Inspectors Association, ICC, the Metropolitan Detroit Chapter of CSI, and the AIA Detroit Building Codes and Regulations Committee. In his professional career, Tognetti often performs design peer reviews, investigates/repairs exterior enclosure problems, and researches and advises internal and external clients on the performance of exterior enclosure assemblies for both new and existing buildings.   Course Access Courses are accessible in LearnUpon for one year from the date of purchase. Credit Start Date    01/15/25           Credit Expiration Date   01/15/28 Course Recommended Prerequisite(s) N/A IIBEC Core Competencies: Exterior Walls Knowledge Level: Introductory Continuing Education Credit Statement This course is approved for 1.0 IIBEC CEH This course is approved for 1.0 AIA LU/HSW AIA Course Number: CONV25_11_OD AIA Provider Number: G024 Continuing Education Credit Claim Information To claim IIBEC CEHs, learners are required to: Achieve a passing score of 70% on the summative assessment (learners are provided unlimited attempts) Complete the course Evaluation & Attestation Survey After completing the Evaluation & Attestation Survey, learners will be able to download a Certificate of Completion.  Learners are responsible for self-reporting IIBEC CEH credit by uploading their Certificate of Completion to their IIBEC Portal. For assistance in self-reporting CEHs, please reach out to: [email protected] To claim AIA LU, learners are required to complete the above requirements, as well as: Complete the AIA Survey (AIA member number is required) AIA continuing education Learning Units earned upon completion of this course will be reported to AIA CES for AIA members.   AIA CES Provider statement IIBEC is a registered provider of AIA-approved continuing education under Provider G024. All registered AIA CES Providers must comply with the AIA Standards for Continuing Education Programs.  Any questions or concerns about this provider or this learning program may be sent to AIA CES ([email protected] or (800) AIA 3837, Option 3). This learning program is registered with AIA CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. AIA continuing education credit has been reviewed and approved by AIA CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request. Read more

Course Overview This session was originally presented at the 2025 IIBEC International Convention & Trade Show in Orlando, Florida.  This course includes the following components: recording of the live session a summative assessment consisting of 10 multiple-choice questions two surveys required to claim continuing education credit   Description Roofing systems play a crucial role in achieving seamless integration between horizontal and vertical enclosure systems. As building enclosure performance requirements continue to rise, roofing systems of a building’s enclosure become more rigorous, and enclosure systems become higher performing. To meet this demand, roofing systems are often called upon to ensure continuity in (thermal, airtightness, and waterproofing aspects) between horizontal and vertical enclosure systems. Often, the detailing, material compatibility, and durability at roofing transitions can ensure the overall effectiveness of the building’s enclosure performance. This presentation looks to explore some of the challenges often overlooked during the design of roofing transitions and emphasizes the importance of discussing detailing at edge conditions. By addressing material compatibility and durability and ensuring effective continuity, roofing systems contribute significantly to the overall effectiveness of a building's enclosure performance.   Author/Speaker Corey Wowk, AIA, LEED AP Senior Project Manager Simpson Gumpertz & Heger Corey C. Wowk, is a senior project manager in the Building Technology Group at Simpson Gumpertz & Heger and has over 19 years of experience in the architecture, engineering, and construction industry, designing, investigating, and rehabilitating curtainwalls, windows, rain screens, roofing, and below-grade waterproofing. He has worked on both small- and large-scale projects, including residential and commercial buildings, mixed-use high-rise facilities, and institutional projects. He is a visiting professor at Pratt Institute’s Graduate Architecture and Urban Design Program with coursework focused on integrated building systems. He is the co-chair of the Rainscreen Association in North America (RAiNA) Performance Committee. Author/Speaker Michael Narcis Project Consultant Simpson Gumpertz & Heger Michael Narcis is a project consultant at Simpson Gumpertz & Heger’s Building Technology group in New York. His background in civil and architectural engineering informs his work on the investigation, design, and construction administration of a range of historic, contemporary, and commercial buildings. He has hands-on design and detailing experience helping to achieve watertight transitions between building enclosure systems.   Nonpresenting Author Leonidia Garbis, PE, LEED GA Senior Project Manager Simpson Gumpertz & Heger Leonidia M. Garbis is a senior project manager at Simpson Gumpertz & Heger (SGH), specializing in building enclosures. With over 10 years of experience, she designs and evaluates new and existing enclosures, focusing on custom curtainwall assemblies from design through construction administration. Her portfolio includes commercial, high-rise residential, and infrastructure projects. She is also skilled in enclosure forensic engineering, including investigating curtainwall and custom glazing systems. Garbis has extensive knowledge of facade, roofing, and waterproofing systems. She actively participates in the Commercial Real Estate Women Network and the Association of Medical Facility Professionals. She leads the SGH Glass and Glazing Practice Area. Course Access Courses are accessible in LearnUpon for one year from the date of purchase. Credit Start Date   01/15/25            Credit Expiration Date  01/15/28 Course Recommended Prerequisite(s) Attendees are expected to understand the four barriers (air, thermal, vapor, water) and have a basic understanding of roofing and exterior wall system design and installation. IIBEC Core Competencies: Exterior Walls, Roofing Knowledge Level: Intermediate Continuing Education Credit Statement This course is approved for 1.0 IIBEC CEH This course is approved for 1.0 AIA LU/HSW AIA Course Number: CONV25_13_OD AIA Provider Number: G024 Continuing Education Credit Claim Information To claim IIBEC CEHs, learners are required to: Achieve a passing score of 70% on the summative assessment (learners are provided unlimited attempts) Complete the course Evaluation & Attestation Survey After completing the Evaluation & Attestation Survey, learners will be able to download a Certificate of Completion.  Learners are responsible for self-reporting IIBEC CEH credit by uploading their Certificate of Completion to their IIBEC Portal. For assistance in self-reporting CEHs, please reach out to: [email protected] To claim AIA LU, learners are required to complete the above requirements, as well as: Complete the AIA Survey (AIA member number is required) AIA continuing education Learning Units earned upon completion of this course will be reported to AIA CES for AIA members.   AIA CES Provider statement IIBEC is a registered provider of AIA-approved continuing education under Provider G024. All registered AIA CES Providers must comply with the AIA Standards for Continuing Education Programs.  Any questions or concerns about this provider or this learning program may be sent to AIA CES ([email protected] or (800) AIA 3837, Option 3). This learning program is registered with AIA CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. AIA continuing education credit has been reviewed and approved by AIA CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request. Read more

Course Overview This session was originally presented at the 2025 IIBEC International Convention & Trade Show in Orlando, Florida.  This course includes the following components: recording of the live session a summative assessment consisting of 10 multiple-choice questions two surveys required to claim continuing education credit   Description Typical industry standard recommendation for slate replacement is at a 20% or more failure threshold. There are no field or lab tests that currently predict the remaining lifespan of existing weathered slate. However, ASTM C406 Standard Specification for Roofing Slate establishes the “grade” of new roofing slate, associated with projected life expectancy. Peter Meijer Architect PC sent slate samples to several labs to conduct C120 Standard Test Methods of Flexure Testing of Slate, C121 Standard Test Method for Water Absorption of Slate, and C217 Standard Test Method for Weather Resistance of Slate. These test results gave a gauge to the existing slate’s performance. A critical aspect of determining the life expectancy of archaic/older material is understanding the limitations associated with modern ASTM test methods. ASTM standards are not always accurate predictors of slate quality but are good sources of empirical data. Peter Meijer Architect PC used our experience and broadened our research into longevity by including testing means and methods from Europe and other countries with a longer history of slate testing. The standards in use on the market to certify slate are the British Standard Institute, BS EN 12326-1:2014, Slate and Stone for Discontinuous Roofing and External Cladding, and the United States ASTM C406.   Author/Speaker Peter Meijer, AIA, RP Principal Peter Meijer Architect PC Peter Meijer, principal, has over 30 years of professional experience with an emphasis on the preservation and assessment of older, existing, and historic buildings. As a professional architect with a background in scientific research, He has developed his career with a focus on the unique building sciences associated with existing and historic resources. He has become a well-regarded expert on the diverse issues affecting older buildings both regionally and nationally.   Non-Presenting Author Hali Knight Peter Meijer Architect Hali Knight has 10 years of professional experience, primarily with a focus on restoration and building enclosure design for existing and historic structures. While at Peter Meijer Architect PC (PMA), she has led many projects that include assessments and repair recommendations for historic materials such as masonry, slate, and terra cotta. Many of PMA’s projects use material testing and on-site evaluation as tools to direct building enclosure repair methodologies and priorities. In addition to restoration work, she has worked on several large-scale renovation projects that include seismic upgrades and tenant improvements.   Course Access Courses are accessible in LearnUpon for one year from the date of purchase. Credit Start Date   01/15/25            Credit Expiration Date  01/15/28 Course Recommended Prerequisite(s) Attendees should have a general knowledge of slate roof systems. IIBEC Core Competencies: Roofing Knowledge Level: Intermediate Continuing Education Credit Statement This course is approved for 1.0 IIBEC CEH This course is approved for 1.0 AIA LU/HSW AIA Course Number: CONV25_06_OD AIA Provider Number: G024 Continuing Education Credit Claim Information To claim IIBEC CEHs, learners are required to: Achieve a passing score of 70% on the summative assessment (learners are provided unlimited attempts) Complete the course Evaluation & Attestation Survey After completing the Evaluation & Attestation Survey, learners will be able to download a Certificate of Completion.  Learners are responsible for self-reporting IIBEC CEH credit by uploading their Certificate of Completion to their IIBEC Portal. For assistance in self-reporting CEHs, please reach out to: [email protected] To claim AIA LU, learners are required to complete the above requirements, as well as: Complete the AIA Survey (AIA member number is required) AIA continuing education Learning Units earned upon completion of this course will be reported to AIA CES for AIA members.   AIA CES Provider statement IIBEC is a registered provider of AIA-approved continuing education under Provider G024. All registered AIA CES Providers must comply with the AIA Standards for Continuing Education Programs.  Any questions or concerns about this provider or this learning program may be sent to AIA CES ([email protected] or (800) AIA 3837, Option 3). This learning program is registered with AIA CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. AIA continuing education credit has been reviewed and approved by AIA CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request. Read more

Course Overview This session was originally presented at the 2025 IIBEC International Convention & Trade Show in Orlando, Florida.  This course includes the following components: recording of the live session a summative assessment consisting of 10 multiple-choice questions two surveys required to claim continuing education credit   Description Roofs play a vital role in building performance, but their effectiveness hinges on proper moisture management. This session empowers designers and building owners to make informed decisions regarding air and vapor control layers, crucial components affecting a building’s energy efficiency, durability, and overall health. During this session, participants will explore the distinct functions of air barriers and vapor retarders, as well as appropriate applications in various climates and building types. Understanding the “when and where” of these control layers informs decisions that enhance a building’s energy efficiency, durability, and overall health. This approach leads to the creation of cost-effective and long-lasting roof systems, ensuring a building’s peak performance for years to come. The ever-evolving landscape of building design demands ever-evolving solutions. Roofs, once simple barriers against the elements, now play a much more intricate role. As buildings grow larger, environmental concerns heighten, and technology advances, our understanding of building science takes center stage. This session delves into the world of air and vapor control layers, the silent guardians of a building's key to moisture control, health, and energy efficiency.   Speaker/Author Scott Wood Senior Building Scientist VaproShield As the senior building scientist at VaproShield, Scott Wood provides product support running the laboratory for evaluating existing and new product development. He provides technical support for the company’s representatives and clients and assists in the development and updating technical aspects of product literature. Wood has authored numerous papers and American Institute of Architects (AIA) presentations in areas of both thermography and building science, providing thousands with his knowledge in these sciences. He is involved in many organizations regarding thermography and building science, including serving as the director of building science of the International Association of Certified Thermographers (IACT), as an active voting member for ASTM C6 and C16 committees, and as a member of SeaBEC.   Course Access Courses are accessible in LearnUpon for one year from the date of purchase. Credit Start Date   01/15/25            Credit Expiration Date  01/15/25 Course Recommended Prerequisite(s) Basic understanding of the roof enclosure, moisture movement, vapor, and air control layers IIBEC Core Competencies: Roofing Knowledge Level: Intermediate Continuing Education Credit Statement This course is approved for 1.0 IIBEC CEH This course is approved for 1.0 AIA LU/HSW AIA Course Number: CONV25_20_OD AIA Provider Number: G024 Continuing Education Credit Claim Information To claim IIBEC CEHs, learners are required to: Achieve a passing score of 70% on the summative assessment (learners are provided unlimited attempts) Complete the course Evaluation & Attestation Survey After completing the Evaluation & Attestation Survey, learners will be able to download a Certificate of Completion.  Learners are responsible for self-reporting IIBEC CEH credit by uploading their Certificate of Completion to their IIBEC Portal. For assistance in self-reporting CEHs, please reach out to: [email protected] To claim AIA LU, learners are required to complete the above requirements, as well as: Complete the AIA Survey (AIA member number is required) AIA continuing education Learning Units earned upon completion of this course will be reported to AIA CES for AIA members.   AIA CES Provider statement IIBEC is a registered provider of AIA-approved continuing education under Provider G024. All registered AIA CES Providers must comply with the AIA Standards for Continuing Education Programs.  Any questions or concerns about this provider or this learning program may be sent to AIA CES ([email protected] or (800) AIA 3837, Option 3). This learning program is registered with AIA CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. AIA continuing education credit has been reviewed and approved by AIA CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request. Read more

Course Overview This session was originally presented at the 2025 IIBEC International Convention & Trade Show in Orlando, Florida.  This course includes the following components: recording of the live session a summative assessment consisting of 10 multiple-choice questions two surveys required to claim continuing education credit   Description Most masonry veneer facades existing today were prescriptively designed using long-standing requirements that have proven to be effective over decades. However, these prescriptive design methods come with many limitations on total height, location, and material types. With the release of TMS 402/602-22, new engineered masonry veneer design methods allow for expanded use of masonry veneers exceeding the prescriptive design limitations. This presentation will briefly review prescriptive design requirements and explore ways of utilizing the new engineered design requirements to advance facade design, improve construction practices, and expand the use of masonry veneer.   Speaker/Author Robert M. Chamra, P.E. Senior Associate Walter P. Moore and Associates, Inc. Robert “Bobby” Chamra is a Professional Engineer (P.E.) with 11 years of experience focused on structural restoration and building enclosure consulting in existing buildings. Chamra is currently serving as a voting member for The Masonry Society’s TMS 402/602 Building Code Requirements and Specification for Masonry Structures for the 2028 Code Cycle and is the secretary for the Veneer Subcommittee. Bobby has also served as a member of ASTM International Committee C15 Manufactured Masonry Units, Mortars, and Grouts. When not working on the existing built environment, he enjoys spending time with his family, playing golf, gardening, cooking, and eating.   Course Access Courses are accessible in LearnUpon for one year from the date of purchase. Credit Start Date   01/15/25            Credit Expiration Date  01/15/28 Course Recommended Prerequisite(s) N/A IIBEC Core Competencies: Exterior Walls   Knowledge Level: Intermediate Continuing Education Credit Statement This course is approved for 1.0 IIBEC CEH This course is approved for 1.0 AIA LU/HSW AIA Course Number: CONV25_16_OD AIA Provider Number: G024 Continuing Education Credit Claim Information To claim IIBEC CEHs, learners are required to: Achieve a passing score of 70% on the summative assessment (learners are provided unlimited attempts) Complete the course Evaluation & Attestation Survey After completing the Evaluation & Attestation Survey, learners will be able to download a Certificate of Completion.  Learners are responsible for self-reporting IIBEC CEH credit by uploading their Certificate of Completion to their IIBEC Portal. For assistance in self-reporting CEHs, please reach out to: [email protected] To claim AIA LU, learners are required to complete the above requirements, as well as: Complete the AIA Survey (AIA member number is required) AIA continuing education Learning Units earned upon completion of this course will be reported to AIA CES for AIA members.   AIA CES Provider statement IIBEC is a registered provider of AIA-approved continuing education under Provider G024. All registered AIA CES Providers must comply with the AIA Standards for Continuing Education Programs.  Any questions or concerns about this provider or this learning program may be sent to AIA CES ([email protected] or (800) AIA 3837, Option 3). This learning program is registered with AIA CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. AIA continuing education credit has been reviewed and approved by AIA CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request. Read more

Course Overview This session was originally presented at the 2025 IIBEC International Convention & Trade Show in Orlando, Florida.  This course includes the following components: recording of the live session a summative assessment consisting of 10 multiple-choice questions two surveys required to claim continuing education credit   Description Facade systems serve several critical purposes, including establishing the architectural identity and providing protection from the elements. Often unbeknownst to owners, occupants, and the public, the condition of facade systems is frequently compromised due to deficiencies in the original design and construction, and/or deferred maintenance. Various factors contribute to the presence of these conditions including an inability to verify systems’ performance without performing hands-on surveys of elevated areas and challenges with completing destructive testing. Such conditions can lead to performance issues ranging from water leakage and isolated distress to detached cladding elements and collapsed facades that pose life-safety hazards. Although there are countless types of facade systems and causes of performance issues, select facade systems more commonly result in detachment. Understanding the limitations of these systems and components can help reduce future failures. Tailored for owners, property managers, architects, and engineers, this session will provide insights into preventing detachment and collapse of facade systems. Attendees will gain an understanding of facade systems that are more prone to failure and learn about strategies to mitigate potential failures. This session will also cover investigative and analysis strategy to evaluate the extent of failures and the performance of remnant facade systems.   Speaker/Author Paul Sujka, PE Senior Consulting Engineer Simpson Gumpertz and Heger Paul Sujka has been a part of the construction industry since 2011, with nearly 10 of his years of experience coming from working at Simpson, Gumpertz and Heger (SGH), where he was worked on building enclosure projects of various sizes. He has been involved in all phases of building construction, including investigation, rehabilitation scope, new design scope, and construction administration services. His experience is primarily focused on building enclosure systems, specializing in fenestration systems, waterproofing, roofing, and contemporary wall systems.   Speaker/Author Matthew Normandeau, PE, LEED AP Principal Simpson Gumpertz & Heger Matthew Normandeau has nearly 20 years of experience at Simpson, Gumpertz and Heger (SGH), where he brings his extensive experience, ingenuity, and forward-thinking to each building enclosure project. Matthew leads multidisciplinary design teams on projects with extensive investigation and rehabilitation scope, including the replacement of building enclosure systems and recladding buildings. He has published papers on various topics related to building enclosures, has lectured at local and national conferences, and is a registered professional engineer. Matt is also the task group chair and technical contact for the ASTM International E06.55 - Standard Guide for Building Enclosure Commissioning.   Course Access Courses are accessible in LearnUpon for one year from the date of purchase. Credit Start Date    01/15/25           Credit Expiration Date     01/15/28 Course Recommended Prerequisite(s) N/A IIBEC Core Competencies: Exterior Walls Knowledge Level: Introductory Continuing Education Credit Statement This course is approved for 1.0 IIBEC CEH This course is approved for 1.0 AIA LU/HSW AIA Course Number: CONV25_07_OD AIA Provider Number: G024 Continuing Education Credit Claim Information To claim IIBEC CEHs, learners are required to: Achieve a passing score of 70% on the summative assessment (learners are provided unlimited attempts) Complete the course Evaluation & Attestation Survey After completing the Evaluation & Attestation Survey, learners will be able to download a Certificate of Completion.  Learners are responsible for self-reporting IIBEC CEH credit by uploading their Certificate of Completion to their IIBEC Portal. For assistance in self-reporting CEHs, please reach out to: [email protected] To claim AIA LU, learners are required to complete the above requirements, as well as: Complete the AIA Survey (AIA member number is required) AIA continuing education Learning Units earned upon completion of this course will be reported to AIA CES for AIA members.   AIA CES Provider statement IIBEC is a registered provider of AIA-approved continuing education under Provider G024. All registered AIA CES Providers must comply with the AIA Standards for Continuing Education Programs.  Any questions or concerns about this provider or this learning program may be sent to AIA CES ([email protected] or (800) AIA 3837, Option 3). This learning program is registered with AIA CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product. AIA continuing education credit has been reviewed and approved by AIA CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.   Read more